I updated the firmware on the Domatic VOIP Linksys (RT31P2)router and now it does not work.
Posted by - NA - on 15 March 2007 07:54 PM
If you have updated the firmware on the Domatic VOIP Linksys (RT31P2)router and it does not work now. Its configuration will have to be reset. You will need to do the following to get it working again:
  1. Connect router to power.
  2. Connect internet connection to “Internet” port on rear of router.
  3. Connect a PC to Ethernet” port 1 on rear of router.
  4. From the PC connected to the router, open an Internet Explore window and enter the following URL:

    http://192.168.15.1/resync?http://lsys.domatic.com/init.cfg

  5. Router will reboot automatically and download the appropriate configuration information.
If possible avoid pressing the reset button on the device.
(130 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below. This is required to prevent automated registrations and form submissions.

Help Desk Software by Kayako Fusion